AD-07-H-100-008I Evaporative Cooler Inox

Skip to the beginning of the images gallery

Details

Technical data
AD-07-H-100-008 – Evaporative air cooler to 5.760 m3/h with horizontal air outlet

• Air flow: 5.760 m³/h
• Available Pressure: 100 Pa
• Cooling Panel Thickness: 100mm
• Efficiency panel: 85.5%
• Motor power fan: 0,76 kW
• Voltage: 230V/I/50Hz
• Motor pump power: 16W
• Voltage: 230V/I/50Hz
• Dimensions mm: 825W x 855D x 1095H
• Weight: 92 kg

Main features

• Rigid structure thanks to high-density polyamide parts and interiorly enervated.
• End posts made of stainless steel of the quality AISI-304.
• High efficiency chiller panels with protective grids in gray RAL 7035.
• Fan group in galvanized steel.
• Bearing protection cover to prevent oxidation.
• Base base with legs for easy installation and transport.
• Automatic casting system patented by MET MANN.
• Continuous drainage to avoid high concentrations of mineral salts.
• Quick opening of panels with half-turn rotary fasteners.
• Hydraulic and electrical installation connected at the factory.
• Louvres in stainless steel.
• On request, they can be supplied with dust filter system, fan unit and ATEX motor.

Additional Details

Additional Details
Delivery	This item is normally assembled to order in mainland Europe and delivered direct
Brand	Met Mann
Warranty	Manufacturers warranty of 10 years on polyamide structure and 1 year on other components, effective once the equipment has either been installed by Puravent or installed by others and commissioned by Puravent

AD-07.pdf (1MB)

catalogo-AD-SMALL-2024.pdf (3.3MB)

Useful Articles

Commercial Air Purifiers - Economies of scale

When the cost of commercial air purifiers is analysed on the basis of capital and running cost for air volume treated and power used there are some incredible results.

Read

30/06/21
Evaporative Cooler Construction Materials

If you are hoping that your new cooling system is going to be a sure-fire long-term asset for your business, perhaps you should consider the evaporative coolers construction materials in some detail.

Read

27/05/21
Evaporative Cooler Outlet Options

The choice of evaporative cooler outlet will depend on how the cooler is to be installed on site. There are basically 3 different configurations of which 1 will need to be chosen for each evaporative cooler.

Read

27/05/21

View all

Heat Load	Watts	BTU
Average The Room Is A Normal Residential Room, Office, Reception Area Or Similar, Where There Is Not Overly Crowded With People, Computer And Office Equipment.
Above Average There Are Factors That Contribute To Additional Heat Being Generated In The Room E.G. Strong Lighting, Overcrowding With People And Office Equipment, Conservatory Type Room, Or Flat Roofed Room.
High There Are Factors That Contribute To A High Heat Load In The Room. E.G. Commercial Cooking, Much Computer And Server Equipment, Switchgear, Temporary Building With Thin Walls And Flat Room, Plain Glass Conservatory.

Variable	Units	Notes/Guidance
System Airflow	M3/Hr	If you have it in cfm then multiply your cfm value by 1.7 to get m3/hr
Average Combined Pressure Drop Of Filters Of Higher Than F6 Efficiency	Pascals	F8 bag filters pressure drop - typical clean clean to dirty, 160 - 250 Pascals F9 compact filters pressure drop - typical clean to dirty, 160 - 350 Pascals H10 HEPA filter pressure drop - typical clean to dirty, 250 - 600 Pascals 9.8 Pascals = 1 mm wg, & 249 Pascals = 1 inch wg
Carbon Filters Pressure Drop	Pascals	For compact type carbons pressure drop between 100 - 150 Pa Bonded carbon panels typically 150 - 170 Pa Loose granular carbon panels typically 130 Pa
Annual Operational Hours	Hrs/Annum	8760 hours in a year If operating for 5 days a week, excluding public holidays, for 12 hrs/day = 3000 hrs
Cost Of Power	Pence Per Kwh	Huge variance in what different companies pay. heck your last bill to be sure, otherwise put in 10p
Fan Efficiency	(As Decimal Value, Eg 100%=1)	Would typically be around 60%, so if you don’t have specific information use 0.6
Fan Motor Efficiency	(As Decimal Value, Eg 100%=1)	Larger motors should be around 90%, so if you don’t have specific information use 0.9

The Total Average Pressure Drop Over Your Higher Efficiency Filters And/Or Carbon Filters Is;		Pascals
This Pressure Drop Is Costing In Energy Alone	£	Per year
It Is Probable That A Sanuvox In-Duct System Could Break Down The Biological, Chemical And Odourous Contaminants On This Air Flow For Between 16 And 25% Of This Running Cost	£	Lower energy cost estimate of an equivalent Sanuvox system (16%)
	£	Higher energy cost estimate of an equivalent Sanuvox system (25%)

Type Of Building	Kw Range		BTU Range
Sports Centres
Retail Premises
Office Premises
Small Industrial Unit
Medium Industrial Units
Larger Industrial Buildings
School/Community Halls
Churches

Room/building volume	m3
Temperature differential (deltaT °C)	°C

Get in Touch

AD-07-H-100-008I Evaporative Cooler Inox

Give Us a Call

Our Address

Leave a Message

General Enquiries

Technical Enquiries

Postal Address

Email Us