FireFlo Spare Parts

Sometimes people keep on buying cheap import industrial fan heaters, all because they can't keep the old heater going for lack of spare parts. Well the more canny folk buy British made FireFlo heaters precisely because they can get FireFlo Spare Parts for them. This cobbled together example outlines a comparison between two heaters, where every couple of years somthing on both heaters goes wrong and the comparative costs to effect a remedy in each case.

		Import 30kw heater		Fireflo FF29
Year 1	New heater	£375.00		£491.00
Year 2	No problems this year	£0.00		£0.00
Year 3	Element burnt out	£375.00	(replace heater)	£36.00	(replacement element)
Year 4	No problems this year	£0.00		£0.00
Year 5	Contactor broke	£375.00	(replace heater)	£92.00	(replacement contactor)
Year 6	No problems this year	£0.00		£0.00
Year 7	Thermal cut out and 2 elements packed up	£375.00	(replace heater)	£87.00	(replacement thermal cut out and 2 elements)
	total	£1,500.00		£706.00

In 7 short years the cheap import solution has cost more than double that of the FireFlo heater, purely because it gets replaced because import heater spares are difficult if not impossible to source. The Fireflo, on the other hand, has good availability of heater spares and this ensure that the faithfull FF29 goes on, and on, and on...

Old Fireflo FF3 heater FireFlo Spare parts

This FF3 looks fit for the skip. But spares will keep it heating for years to come

Old FireFlo FF18 industrial fan heater FireFlo Spare parts

This old FF18 might only need an element and she is good for at least another couple of years!

Don't be put off! With the right spare parts there are years of service left in this Fireflo FF29

This is all about spare parts availability for FireFlo heaters. Puravent supply not only the heaters from this range including the FF3, FF12, FF13, FF20, FF29, FF42 and FF80, but we also supply the FireFlo spare parts to keep your heater investment pumping out the heat year in year out. Typical FireFlo spare parts for FF29s, for example include:

BW0201151	FF29/12 ELECTRICS MOUNT PANEL
ME040316	TRUNK HANDLE C/W BRACKET
EL010220	32A 400V CONTACTOR
EL030409	THERMOSTAT C/W KNOW AND BEZEL
HE010106	2665 230V ELEMENT
EL030235	I/0 ROCKER SWITCH 16A
FA010303	133 FAN MOTOR
EL010301	80C O/TEMP CUT OUT
ME010209	50MM CASTOR C/W BRAKE
ME010210	50MM CASTOR
ME040204	PG21 CABLE GLAND C/W LOCKNUT
EL020121	4 CORE 4MM X 1.5M CABLE C/W 32A 4 PIN PLUG
EL020415	40A TERMINAL BLOCK
BW010910	250MM SPIGOT

Sure as eggs is eggs, in defiance of all the forces of common sense, there will be some who insist on buying cheap and buying twice, or in our example buying 4 times!

Call 01729 824108 for the parts to keep your fireflo heater going, or if you like the idea of a new one, click any of these links.

FireFlo FF3 fan heater

FireFlo FF12 fan heater

FireFlo FF13 Fan heater

FireFlo FF20 fan heater

Fireflo blue Giant FF29 fan heater

Fireflo FF42 42kw fan heater

Heat Load	Watts	BTU
Average The Room Is A Normal Residential Room, Office, Reception Area Or Similar, Where There Is Not Overly Crowded With People, Computer And Office Equipment.
Above Average There Are Factors That Contribute To Additional Heat Being Generated In The Room E.G. Strong Lighting, Overcrowding With People And Office Equipment, Conservatory Type Room, Or Flat Roofed Room.
High There Are Factors That Contribute To A High Heat Load In The Room. E.G. Commercial Cooking, Much Computer And Server Equipment, Switchgear, Temporary Building With Thin Walls And Flat Room, Plain Glass Conservatory.

Variable	Units	Notes/Guidance
System Airflow	M3/Hr	If you have it in cfm then multiply your cfm value by 1.7 to get m3/hr
Average Combined Pressure Drop Of Filters Of Higher Than F6 Efficiency	Pascals	F8 bag filters pressure drop - typical clean clean to dirty, 160 - 250 Pascals F9 compact filters pressure drop - typical clean to dirty, 160 - 350 Pascals H10 HEPA filter pressure drop - typical clean to dirty, 250 - 600 Pascals 9.8 Pascals = 1 mm wg, & 249 Pascals = 1 inch wg
Carbon Filters Pressure Drop	Pascals	For compact type carbons pressure drop between 100 - 150 Pa Bonded carbon panels typically 150 - 170 Pa Loose granular carbon panels typically 130 Pa
Annual Operational Hours	Hrs/Annum	8760 hours in a year If operating for 5 days a week, excluding public holidays, for 12 hrs/day = 3000 hrs
Cost Of Power	Pence Per Kwh	Huge variance in what different companies pay. heck your last bill to be sure, otherwise put in 10p
Fan Efficiency	(As Decimal Value, Eg 100%=1)	Would typically be around 60%, so if you don’t have specific information use 0.6
Fan Motor Efficiency	(As Decimal Value, Eg 100%=1)	Larger motors should be around 90%, so if you don’t have specific information use 0.9

The Total Average Pressure Drop Over Your Higher Efficiency Filters And/Or Carbon Filters Is;		Pascals
This Pressure Drop Is Costing In Energy Alone	£	Per year
It Is Probable That A Sanuvox In-Duct System Could Break Down The Biological, Chemical And Odourous Contaminants On This Air Flow For Between 16 And 25% Of This Running Cost	£	Lower energy cost estimate of an equivalent Sanuvox system (16%)
	£	Higher energy cost estimate of an equivalent Sanuvox system (25%)

Type Of Building	Kw Range		BTU Range
Sports Centres
Retail Premises
Office Premises
Small Industrial Unit
Medium Industrial Units
Larger Industrial Buildings
School/Community Halls
Churches

Room/building volume	m3
Temperature differential (deltaT °C)	°C

Get in Touch

FireFlo Spare Parts