CJK/Filter/EC-310

Skip to the beginning of the images gallery

Details

CJK / FILTER / EC

Air purifying units that have been designed for the movement, cleaning, odour removal and purification of air, in high occupancy areas withhigh demands on soundproofing and versatility.

ENERGY SAVING

The air inlet aperture has been designed to aid laminar air flow which, together with a dynamicpressure balancing chamber, helps to optimiseefficiency

LOW SOUND LEVEL

The 25mm thick noise reducing outer panels use bespoke, high quality insulating materials and make this ideal equipment for installation in areas where a low noise level is required.

DURABILITY

The outer panels of these units are made of pre-finished sheet metal with 40mm aluminium structural frames to maximise the life of the equipment, allowing it to be installed in outdoors corrosive areas. The installation of a rain cover is recommended to prevent entry of water.

EASE OF INSTALLATION AND MAINTENANCE

The access door allows quick access to clean the impeller and replace filters.

FILTRATION STAGES

The units incorporate two stages of F7 + F9 or F7 + HEPA H14 filtration, depending on the model, as well as an activated carbon filter for the elimination of odours, giving a combination with excellent filtration performance.

GERMICIDAL CHAMBER

Depending on model, these purification units can be supplied with an integrated UVc ultraviolet germicidal chamber.

Characteristics

Frame made from 40mm profile aluminium.
Outer panels made of 25 mm thick, high quality acoustic insulation, and pre-finished sheet metal.
Backward curved impeller.
Standard flanges on intake and discharge sides to facilitate installation in ducts.
Filtration stages according to model: F7 + F9 or F7 + HEPA H14, Activated carbon filter odour removal.
Control and alarm of dirty filters.
Germicidal chamber with UVc (256 nm), depending on model.
Inspection cover for maintenance and replacement of filters.
Air inlet with diffusers to increase the efficiency of the fan.

Motor

High efficiency E.C. technology, external rotor motor, controllable by 0-10V signal.
Single phase 200-240V– 50 / 60Hz and three phase 380-480V– 50 / 60Hz.
Air temperature range of -25ºC to +60ºC.

Finish:

Aluminum profile frame and pre_x0002_ finished sheet metal with 25mm thick acoustically insulated panels.

Option

Automatic control system.

Additional Details

Additional Details
Delivery	This item is normally assembled to order in mainland Europe and delivered direct
Brand	Sodeca
Warranty	1 year manufacturers warranty

CJK_FILTER_brochure.pdf (3.2MB)

Useful Articles

Indoor Air Pollution Sources

The EPA in America says most indoor air has 2 - 10 times higher concentrations of harmful pollutants than outdoor air. Some organisations have reported inside pollution levels up to 100 times that found outside. The air indoors is the No. 1 environmental health risk.

Read

27/05/21
Bread Mould: a Bakery Problem with a UV Solution

We can specify and propose an engineered solution which involves Sanuvox ultraviolet air purification equipment and, where required, a prefiltration system.

Read

13/05/21
UV Infection Control

UV Infection Control - A key element to preventing airborne spread of infections in healthcare

Read

08/04/21

View all

Heat Load	Watts	BTU
Average The Room Is A Normal Residential Room, Office, Reception Area Or Similar, Where There Is Not Overly Crowded With People, Computer And Office Equipment.
Above Average There Are Factors That Contribute To Additional Heat Being Generated In The Room E.G. Strong Lighting, Overcrowding With People And Office Equipment, Conservatory Type Room, Or Flat Roofed Room.
High There Are Factors That Contribute To A High Heat Load In The Room. E.G. Commercial Cooking, Much Computer And Server Equipment, Switchgear, Temporary Building With Thin Walls And Flat Room, Plain Glass Conservatory.

Variable	Units	Notes/Guidance
System Airflow	M3/Hr	If you have it in cfm then multiply your cfm value by 1.7 to get m3/hr
Average Combined Pressure Drop Of Filters Of Higher Than F6 Efficiency	Pascals	F8 bag filters pressure drop - typical clean clean to dirty, 160 - 250 Pascals F9 compact filters pressure drop - typical clean to dirty, 160 - 350 Pascals H10 HEPA filter pressure drop - typical clean to dirty, 250 - 600 Pascals 9.8 Pascals = 1 mm wg, & 249 Pascals = 1 inch wg
Carbon Filters Pressure Drop	Pascals	For compact type carbons pressure drop between 100 - 150 Pa Bonded carbon panels typically 150 - 170 Pa Loose granular carbon panels typically 130 Pa
Annual Operational Hours	Hrs/Annum	8760 hours in a year If operating for 5 days a week, excluding public holidays, for 12 hrs/day = 3000 hrs
Cost Of Power	Pence Per Kwh	Huge variance in what different companies pay. heck your last bill to be sure, otherwise put in 10p
Fan Efficiency	(As Decimal Value, Eg 100%=1)	Would typically be around 60%, so if you don’t have specific information use 0.6
Fan Motor Efficiency	(As Decimal Value, Eg 100%=1)	Larger motors should be around 90%, so if you don’t have specific information use 0.9

The Total Average Pressure Drop Over Your Higher Efficiency Filters And/Or Carbon Filters Is;		Pascals
This Pressure Drop Is Costing In Energy Alone	£	Per year
It Is Probable That A Sanuvox In-Duct System Could Break Down The Biological, Chemical And Odourous Contaminants On This Air Flow For Between 16 And 25% Of This Running Cost	£	Lower energy cost estimate of an equivalent Sanuvox system (16%)
	£	Higher energy cost estimate of an equivalent Sanuvox system (25%)

Type Of Building	Kw Range		BTU Range
Sports Centres
Retail Premises
Office Premises
Small Industrial Unit
Medium Industrial Units
Larger Industrial Buildings
School/Community Halls
Churches

Room/building volume	m3
Temperature differential (deltaT °C)	°C

Get in Touch

CJK/Filter/EC-310

Give Us a Call

Our Address

Leave a Message

General Enquiries

Technical Enquiries

Postal Address

Email Us