CJK/Filter/EC-400
CJK/FILTER/EC
The CJK / FILTER / EC air purifying units have been designed for the movement, cleaning, odour removal and purification of air, in high occupancy areas with high demands on soundproofing and versatility.
ENERGY SAVING
The air inlet aperture has been designed to aid laminar air flow which, together with a dynamic pressure balancing chamber, helps to optimise efficiency.
LOW SOUND LEVEL
The 25mm thick noise reducing outer panels use bespoke, high quality insulating materials and make this ideal equipment for installation in areas where a low noise level is required.
DURABILITY
The outer panels of these units are made of pre-finished sheet metal with 40mm aluminium structural frames to maximise the life of the equipment, allowing it to be installed in outdoors corrosive areas. The installation of a rain cover is recommended to prevent entry of water.
EASE OF INSTALLATION AND MAINTENANCE
The access door allows quick access to clean the impeller and replace filters.
FILTRATION STAGES
The units incorporate two stages of F7 + F9 or F7 + HEPA H14 filtration, depending on the model, as well as an activated carbon filter for the elimination of odours, giving a combination with excellent filtration performance.
GERMICIDAL CHAMBER
Depending on model, these purification units can be supplied with an integrated UVc ultraviolet germicidal chamber.
Characteristics:
- Frame made from 40mm profile aluminium.
- Outer panels made of 25 mm thick, high quality acoustic insulation, and pre-finished sheet metal.
- Backward curved impeller.
- Standard flanges on intake and discharge sides to facilitate installation in ducts.
- Filtration stages according to model: - F7 + F9 or - F7 + HEPA H14 and an activated carbon filter odour removal.
- Control and alarm of dirty filters.
- Germicidal chamber with UVc (256 nm), depending on model.
- Inspection cover for maintenance and replacement of filters.
- Air inlet with diffusers to increase the efficiency of the fan.
- High efficiency E.C. technology, external rotor motor, controllable by 0-10V signal
- Single phase 200-240V– 50 / 60Hz and three phase 380-480V– 50 / 60Hz
- Air temperature range of -25°C to +60°C.
On demand - Automatic control system.
| Delivery | This item is normally assembled to order in mainland Europe and delivered direct |
|---|---|
| Brand | Sodeca |
| Warranty | 1 year manufacturers warranty |
Useful Articles
-
The EPA in America says most indoor air has 2 - 10 times higher concentrations of harmful pollutants than outdoor air. Some organisations have reported inside pollution levels up to 100 times that found outside. The air indoors is the No. 1 environmental health risk.27/05/21 -
9th April 2019 - The Master BCF range of industrial evaporative coolers bring greater versatility to the moulded plastic 'one size' evaporative coolers market.09/04/19 -
Air Purifier or Air Cleaner. Language is on the march, and Puravent explains a bit about the air purifier and air cleaner scene in one example.12/09/14
