EA 9 Electric Wall Mounted Fan Heater

Skip to the beginning of the images gallery

Details

EA
Electric fan heaters for wall mounting

The EA series of electric fan heaters covers a wide range of outputs and is designed for permanent heating of warehouses, industrial premises, garages, drying rooms, etc. The simple, neat design makes the EA series also suitable for public premises, such as shops.

Features:
• 5 output variants rated from 6 kW to 30 kW
• 2 fan speeds
• Built-in temperature regulator and knob for switching from low to high fan speed and continuous/intermittent fan operation
• Air deflector for adjusting vertically the direction of outlet air flow
• Together with the thermostat MCD4-1999, fulfils the Ecodesign directive 2009/125/EU and EU regulation 2015/1188.
• Wall bracket that allows for stepless adjustment of the fan heater angle during installation.

Design:
The casing is made of galvanized sheet steel painted white, and the heater elements are made of stainless steel to EN 1.4301. The junction box includes equipment for automatic temperature control. Degree of protection IP44 (splash-proof) and approved for use in humid and wet areas (e.g. drying rooms).

Mounting/installation:
Wall brackets are included. EA is supplied with a type OK 2 external switch used for turning the heating fan on/off, and to limit power consumption. An EA with a connected sensor/thermostat can control an unlimited amount of slaved EA units. The slave-controlled units receive their control signal from the EA which has a sensor/thermostat connected.

Additional Details

Additional Details
Delivery	Dependant on stock availability. Check with us before ordering
Brand	Veab
Warranty	1 year warrenty in compliance with ORGALIME S2000

EA_VEAB_Heat_Tech_GB.pdf (0.5MB)

Useful Articles

Radiant Heating for Hot Yoga

Radiant heating for hot yoga studios is less than striaight forward. Here is how Puravent tackle these tricky applications. Control is key

Read

10/11/23
Drum heating: 6 Tips for Preheating Raw Materials

6 tips for drum heating and pre-heating other raw materials to help you get them up to a the temperature where they become useable.

Read

10/11/23
Heat from waste wood

There are plenty of blogs about biomass boilers and RHI but what if you want your heat from waste wood to be warm air rather than water. Here's how!

Read

10/11/23

View all

Heat Load	Watts	BTU
Average The Room Is A Normal Residential Room, Office, Reception Area Or Similar, Where There Is Not Overly Crowded With People, Computer And Office Equipment.
Above Average There Are Factors That Contribute To Additional Heat Being Generated In The Room E.G. Strong Lighting, Overcrowding With People And Office Equipment, Conservatory Type Room, Or Flat Roofed Room.
High There Are Factors That Contribute To A High Heat Load In The Room. E.G. Commercial Cooking, Much Computer And Server Equipment, Switchgear, Temporary Building With Thin Walls And Flat Room, Plain Glass Conservatory.

Variable	Units	Notes/Guidance
System Airflow	M3/Hr	If you have it in cfm then multiply your cfm value by 1.7 to get m3/hr
Average Combined Pressure Drop Of Filters Of Higher Than F6 Efficiency	Pascals	F8 bag filters pressure drop - typical clean clean to dirty, 160 - 250 Pascals F9 compact filters pressure drop - typical clean to dirty, 160 - 350 Pascals H10 HEPA filter pressure drop - typical clean to dirty, 250 - 600 Pascals 9.8 Pascals = 1 mm wg, & 249 Pascals = 1 inch wg
Carbon Filters Pressure Drop	Pascals	For compact type carbons pressure drop between 100 - 150 Pa Bonded carbon panels typically 150 - 170 Pa Loose granular carbon panels typically 130 Pa
Annual Operational Hours	Hrs/Annum	8760 hours in a year If operating for 5 days a week, excluding public holidays, for 12 hrs/day = 3000 hrs
Cost Of Power	Pence Per Kwh	Huge variance in what different companies pay. heck your last bill to be sure, otherwise put in 10p
Fan Efficiency	(As Decimal Value, Eg 100%=1)	Would typically be around 60%, so if you don’t have specific information use 0.6
Fan Motor Efficiency	(As Decimal Value, Eg 100%=1)	Larger motors should be around 90%, so if you don’t have specific information use 0.9

The Total Average Pressure Drop Over Your Higher Efficiency Filters And/Or Carbon Filters Is;		Pascals
This Pressure Drop Is Costing In Energy Alone	£	Per year
It Is Probable That A Sanuvox In-Duct System Could Break Down The Biological, Chemical And Odourous Contaminants On This Air Flow For Between 16 And 25% Of This Running Cost	£	Lower energy cost estimate of an equivalent Sanuvox system (16%)
	£	Higher energy cost estimate of an equivalent Sanuvox system (25%)

Type Of Building	Kw Range		BTU Range
Sports Centres
Retail Premises
Office Premises
Small Industrial Unit
Medium Industrial Units
Larger Industrial Buildings
School/Community Halls
Churches

Room/building volume	m3
Temperature differential (deltaT °C)	°C

Get in Touch

EA 9 Electric Wall Mounted Fan Heater

Give Us a Call

Our Address

Leave a Message

General Enquiries

Technical Enquiries

Postal Address

Email Us