Flamrad 703M-NG 3 kw Gas Fired Plaque heater - Manual - Natural Gas
Details
The Flamrad Gas Fired Infrared radiant Heater 700 series are ideal for use in many commercial and industrial applications where full or localised heating is required. Features
? High radiant efficiency - high emissivity plaques with re-radiation gauze.
? High temperature aluminium reflector - increased emissivity, lightweight strong and durable.
? Vitreous steel burner - does not rust or corrode - gives longer life than aluminised steel or stainless iron.
? Lightweight - makes it easy to install and maintain - can be suspended from pipe work.
? Infrared heat - gives instant directional heat where you want it and does not warm the air, so there is no air movement and circulation of dust, all of which means lower running costs.
? Mounted at high level either overhead or on a wall, releasing expensive and often much needed floor space.
? Safety first - all Flamrad heaters have been approved to the stringent safety requirements of the European gas appliance directive and have been granted the CE mark.
These heaters are operated manually with a simple lever cock and pull on/off chains with permanent pilot. A thermo-electric fail safe device is fitted to protect against failure of the gas supply.
? High radiant efficiency - high emissivity plaques with re-radiation gauze.
? High temperature aluminium reflector - increased emissivity, lightweight strong and durable.
? Vitreous steel burner - does not rust or corrode - gives longer life than aluminised steel or stainless iron.
? Lightweight - makes it easy to install and maintain - can be suspended from pipe work.
? Infrared heat - gives instant directional heat where you want it and does not warm the air, so there is no air movement and circulation of dust, all of which means lower running costs.
? Mounted at high level either overhead or on a wall, releasing expensive and often much needed floor space.
? Safety first - all Flamrad heaters have been approved to the stringent safety requirements of the European gas appliance directive and have been granted the CE mark.
These heaters are operated manually with a simple lever cock and pull on/off chains with permanent pilot. A thermo-electric fail safe device is fitted to protect against failure of the gas supply.
| Title | Value |
|---|---|
| Capacity | 3kw (10250BTU) |
| Dimensions H x W x L (mm) | 135 x 245 x 295 |
| Inlet Rc Connection | 1/4 |
| mm from combustibles (above/behind/sides/below) | 1000/650/700/1501 |
| mounting height (m) @ 15? | Not recommended |
| mounting height (m) @ 45? | 2.2-3.2 |
| typical floor coverage m2 (modern/average/uninsulated/spot) | 21/18/14/10 |
| Weight (KG) | 3 |
Out of stock
Additional Details
| Delivery | Dependant on stock availability. Check with us before ordering |
|---|---|
| Brand | Flamrad |
| Warranty | 1 year manufacturers warranty |