Home
Heating
Oil Fired Heaters
Fixed Oil / Diesel Heaters
Oil / Diesel Cabinet Heaters
MM - Base Cabinet Heater - Hot Air Heating From 43 to 500Kw

MM - Base Cabinet Heater - Hot Air Heating From 43 to 500Kw

Skip to the beginning of the images gallery

Details

MM - Industrial Hot Air Heating from 43 to 500Kw

See Models: MM-050-G. MM-070-G. MM-105-G. MM-160-G. Mm-200-G. MM-250-G. MM-300-G. MM-350-G. MM-400-G. MM-500-G.

MM hot air generators are indirect heating type equipment (hot air does not mix with the flue gases) and they work totally autonomously.

They do not need additional heat dissipation elements, reducing the costs of acquisition, installation and maintenance.

Its operation is based on heating a certain air flow, through the combustion of diesel, natural gas or propane gas. This flow is sucked in and driven by the fans that the equipment incorporates and comply with the ERP 2020 regulations.

The main advantages over other heating systems are:

• Reduction of acquisition and installation costs
• Very fast heating system
• Air diffusion can be direct or a duct network can be applied
• 90% combustion efficiency

Instalation

1) Hot air generator with air supply grilles

2) Hot air generator with rotating nozzles

3) Hot air generator with duct and rotary diffusers.

Characteristics

• High performance combustion oven made of AISI-304 or 430 stainless steel in the areas most exposed to heat
• Exterior panel made of galvanized steel lacquered in polyester powder and oven-dried
• Thermal insulation of the areas most exposed to heat
• Low noise centrifugal fans
• IE3 high efficiency electric motors
• Control and safety electrical panel according to European regulations
• Control Thermostats (Fan/Burner/Thermal Safety) room thermostat
• Security system to control the correct depression of the combustion chamber.
• Hot air outlet at the top, where 4-sided air outlet grilles can be installed, rotary outlets for air delivery or directly assembled to a duct network.

The MM range of Base Cabinet heaters come with a burner mounting plate cup and are compatible with Riello, Selas and Ecoflan burners.

Additional Details

Additional Details
Delivery	This item is usually stocked overseas and takes about 2 weeks to deliver. If stock in UK deliverable in 3-4 days. Enquire on 01729 824108
Brand	Met Mann
Warranty	1 year warrenty in compliance with ORGALIME S2000

catalogo-MM-2024.pdf (1.4MB)

Useful Articles

Radiant Heating for Hot Yoga

Radiant heating for hot yoga studios is less than striaight forward. Here is how Puravent tackle these tricky applications. Control is key

Read

10/11/23
Heat from waste wood

There are plenty of blogs about biomass boilers and RHI but what if you want your heat from waste wood to be warm air rather than water. Here's how!

Read

10/11/23
Jumbo Heaters Even Better Than Before

Jumbo heaters have long been recognised as one of the best mobile diesel fired heaters in the market. We examine this revamped classic range of heaters

Read

10/11/23

View all

Heat Load	Watts	BTU
Average The Room Is A Normal Residential Room, Office, Reception Area Or Similar, Where There Is Not Overly Crowded With People, Computer And Office Equipment.
Above Average There Are Factors That Contribute To Additional Heat Being Generated In The Room E.G. Strong Lighting, Overcrowding With People And Office Equipment, Conservatory Type Room, Or Flat Roofed Room.
High There Are Factors That Contribute To A High Heat Load In The Room. E.G. Commercial Cooking, Much Computer And Server Equipment, Switchgear, Temporary Building With Thin Walls And Flat Room, Plain Glass Conservatory.

Variable	Units	Notes/Guidance
System Airflow	M3/Hr	If you have it in cfm then multiply your cfm value by 1.7 to get m3/hr
Average Combined Pressure Drop Of Filters Of Higher Than F6 Efficiency	Pascals	F8 bag filters pressure drop - typical clean clean to dirty, 160 - 250 Pascals F9 compact filters pressure drop - typical clean to dirty, 160 - 350 Pascals H10 HEPA filter pressure drop - typical clean to dirty, 250 - 600 Pascals 9.8 Pascals = 1 mm wg, & 249 Pascals = 1 inch wg
Carbon Filters Pressure Drop	Pascals	For compact type carbons pressure drop between 100 - 150 Pa Bonded carbon panels typically 150 - 170 Pa Loose granular carbon panels typically 130 Pa
Annual Operational Hours	Hrs/Annum	8760 hours in a year If operating for 5 days a week, excluding public holidays, for 12 hrs/day = 3000 hrs
Cost Of Power	Pence Per Kwh	Huge variance in what different companies pay. heck your last bill to be sure, otherwise put in 10p
Fan Efficiency	(As Decimal Value, Eg 100%=1)	Would typically be around 60%, so if you don’t have specific information use 0.6
Fan Motor Efficiency	(As Decimal Value, Eg 100%=1)	Larger motors should be around 90%, so if you don’t have specific information use 0.9

The Total Average Pressure Drop Over Your Higher Efficiency Filters And/Or Carbon Filters Is;		Pascals
This Pressure Drop Is Costing In Energy Alone	£	Per year
It Is Probable That A Sanuvox In-Duct System Could Break Down The Biological, Chemical And Odourous Contaminants On This Air Flow For Between 16 And 25% Of This Running Cost	£	Lower energy cost estimate of an equivalent Sanuvox system (16%)
	£	Higher energy cost estimate of an equivalent Sanuvox system (25%)

Type Of Building	Kw Range		BTU Range
Sports Centres
Retail Premises
Office Premises
Small Industrial Unit
Medium Industrial Units
Larger Industrial Buildings
School/Community Halls
Churches

Room/building volume	m3
Temperature differential (deltaT °C)	°C

Get in Touch

MM - Base Cabinet Heater - Hot Air Heating From 43 to 500Kw

Give Us a Call

Our Address

Leave a Message

General Enquiries

Technical Enquiries

Postal Address

Email Us