SYSAQUA55.H.1P-SP.WPS.AVM

Skip to the beginning of the images gallery

Details

SysAquaL/SysAqua H 25 to 125 have been designed and optimized to operate with R410A refrigerant fluid. They are of single refrigerant circuit type.

They are available incooling only (SysAquaL)andheat pump (SysAquaH)versions.

Each versions consists of11 sizes (25, 30, 35, 40, 45, 55, 65, 75, 90, 105 & 125)and covers a nominal cooling capacity range from25.0 to 122 kWand a nominal heating capacity range from26.9 to 120 kW.

All units are equipped withtwo scroll compressors fitted intandemfor adapting to partial system loads.

The general operation status of the machine is continuously under the control of anIHM controller.

TheSysAquaLandSysAquaH units can operate without water tank, thanks to the lHM controller that implements anauto- adaptative control logicensuring a total protection of the compressors at different load or water volume conditions. The minimum water volume requested in cooling mode is3.5 litresperkWfor application air conditioning and10litresperkWfor application process.

In heating mode,12.5 litres perkWare recommended in order to guarantee homogeneous temperatures during the defrosting cycles (comfort and energysavings). Afan speed controllercan be also supplied as factory-fitted option to authorize the unit to operate in cooling mode at low ambient temperature.

SysAquaLandSysAquaHunits can be supplied in several versions:

- STD (Standard) version: lncludes a low noise (LS) acoustical performance.

- XLN (Extra low noise) version: Obtained by the installation of acoustic box around compressors.

- HPF version: lncreases the static pressure.

Cabinet and structure

The cabinet and structure of the unit are of heavy duty galvanized steel.All galvanized steel components areindividually paintedby a special painting process before the assembly of the unit. This painting system performs a homogeneous protection to the corrosion.The painting is a polyester powder based type, coloured inRAL 7040.

The unitsSysAquaL/SysAquaHare suitable for outdoor installation, directly on the building roof or at the ground level.

Compressors

Each unit is equipped with two scroll compressors fitted on a rail and assembled together to formtandem compressors.

The compressors are then mounted on rubber pads in order to eliminate noise and vibration transmissions. The compressor motor shave a direct startup. Each motor is cooled by the refrigerant gas and is equipped with an overload protection.

Aphase sequence monitoris supplied as standard.

Evaporator

The evaporator is consisting of a stainless steel plate heat exchanger insulated with closed cell synthetic foam. lt is protected by anantifreeze electric heaterto ensure a good protection against freezing at low ambient temperature (-10 ?C min.) when the unit is switchedoff.

Maximum working pressure is 10 bar at water side and 45 at refrigerant side.

Additional Details

Additional Details
Delivery	Dependant on stock availability. Check with us before ordering
Brand	Systemair
Warranty	1 year manufacturers warranty

Heat Load	Watts	BTU
Average The Room Is A Normal Residential Room, Office, Reception Area Or Similar, Where There Is Not Overly Crowded With People, Computer And Office Equipment.
Above Average There Are Factors That Contribute To Additional Heat Being Generated In The Room E.G. Strong Lighting, Overcrowding With People And Office Equipment, Conservatory Type Room, Or Flat Roofed Room.
High There Are Factors That Contribute To A High Heat Load In The Room. E.G. Commercial Cooking, Much Computer And Server Equipment, Switchgear, Temporary Building With Thin Walls And Flat Room, Plain Glass Conservatory.

Variable	Units	Notes/Guidance
System Airflow	M3/Hr	If you have it in cfm then multiply your cfm value by 1.7 to get m3/hr
Average Combined Pressure Drop Of Filters Of Higher Than F6 Efficiency	Pascals	F8 bag filters pressure drop - typical clean clean to dirty, 160 - 250 Pascals F9 compact filters pressure drop - typical clean to dirty, 160 - 350 Pascals H10 HEPA filter pressure drop - typical clean to dirty, 250 - 600 Pascals 9.8 Pascals = 1 mm wg, & 249 Pascals = 1 inch wg
Carbon Filters Pressure Drop	Pascals	For compact type carbons pressure drop between 100 - 150 Pa Bonded carbon panels typically 150 - 170 Pa Loose granular carbon panels typically 130 Pa
Annual Operational Hours	Hrs/Annum	8760 hours in a year If operating for 5 days a week, excluding public holidays, for 12 hrs/day = 3000 hrs
Cost Of Power	Pence Per Kwh	Huge variance in what different companies pay. heck your last bill to be sure, otherwise put in 10p
Fan Efficiency	(As Decimal Value, Eg 100%=1)	Would typically be around 60%, so if you don’t have specific information use 0.6
Fan Motor Efficiency	(As Decimal Value, Eg 100%=1)	Larger motors should be around 90%, so if you don’t have specific information use 0.9

The Total Average Pressure Drop Over Your Higher Efficiency Filters And/Or Carbon Filters Is;		Pascals
This Pressure Drop Is Costing In Energy Alone	£	Per year
It Is Probable That A Sanuvox In-Duct System Could Break Down The Biological, Chemical And Odourous Contaminants On This Air Flow For Between 16 And 25% Of This Running Cost	£	Lower energy cost estimate of an equivalent Sanuvox system (16%)
	£	Higher energy cost estimate of an equivalent Sanuvox system (25%)

Type Of Building	Kw Range		BTU Range
Sports Centres
Retail Premises
Office Premises
Small Industrial Unit
Medium Industrial Units
Larger Industrial Buildings
School/Community Halls
Churches

Room/building volume	m3
Temperature differential (deltaT °C)	°C

Get in Touch