EPTB2 200 m3/h 117cfm Turbine Blower

Pricing

Quantity:

£2,071.43 ( £2,485.72 incl. tax)

Overview

• Very powerful air blower with 200m3/h or 117cfm 1100W / 1.5 HP
• Dries down to -20°C/-4°F
• Can work up to 40°C/104°F

Product Code: EPTB2 RESTO

Trade Enquiry

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Blower Turbine EPTB2 For Restoration Flood Drying.

200m³/h giving up to 260 mbar and 1100W .

Designed for small to medium sized drying assignments as a stand alone or to boost dehumidifier performance.

Ideal for power drying under floors, in-wall cavities and ceilings, preserving plaster dry wall and flooring. Reaches where dehumidifiers don't have enough air pressure to force dry warm air where it is needed.

Works on 110V 50Hz or 220V 50Hz automatically

Free Standing or Installed.

Industrial blower turbine EPTB2 mild steel construction with tough epoxy paint finish. Very powerful air blower with 200m³/h or 117cfm 1100W / 1.5 HP. Moreover, it shortens drying time considerably using high air pressure with added heat from the compression of air and the integral heater. Automatically, it regulates to give constant air temperature out. Gives out up to 260 mbar (26 kilo pascals) of air pressure with manual analogue variable control. Will dry 24/7 and dry even down to -20°C/-4°F. Can work up to 40°C/104°F. Perfect for any climate.

Mild Steel Inside & Out with Tough Epoxy Paint Finish.

It can be carried by one person and transported easily with the carrying handles. Moreover, self-regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively.

50mm / 2" Connectors in and out.

Quickened drying. Input air from any Ecor Pro desiccant dehumidifier. Three EPTB2 fans can be used with any one Ecor Pro dehumidifier giving an energy efficient focused drying solution. This is achieved using the EPJ50 attachment added to the dehumidifier. (This attachment converts the 125mm / 5". To process air out from the dehumidifiers into up to 3 separate dry air flows of 50mm / 2". These inputs can be put directly into the EPTB2 meaning three EPTB2 can be used with each dehumidifier.

Suction Drying

The Turbine Blower 2 draws air from the construction through hose and water separator. Moreover, it is crucial that a water separator is used to prevent critical water from being sucked into the Turbine Blower which will damage the motor and cause an electrical shock safety issue.

Pressure Drying

The Turbine Blower 2 turbine can be fed dry air from any Ecor Pro desiccant dehumidifier, compressing this down to force it into cavities in walls, floors and ceilings. This makes the construction temperature rise and the drying process quicken. This heated air also can hold more water which is forced out of the cavities through air leaks back into the main room. These leaks can be controlled via drilled holes or just left to naturally return through gaps between the floor and the walls. In the room that air can be dried and recirculated. Before pressure drying is applied, suction drying shall be used to remove any surface water from the voids again quickening drying.

Features Explained

Turbine Blower or Turbine Vacuum• Small turbine blower. Used even in reverse to suck moisture from an environment (using the correct water separator). Moreover, it has the same footprint as the Ecor Pro DH35XX or EDP200. EPTB2 can be used with all dehumidifiers but stacks with these particular models.
Highly Compact• Small turbine blower that has the same footprint as the Ecor Pro DH35XX or EDP200. EPTB2 can be used with all dehumidifiers but stacks with these particular models.
HEPA Type Motor Dust Filter & Process Air Filter• The Turbine Blower 2 benefits from a HEPA type dust filter for maximum filtration of motor air and process air. Furthermore, easily replaced in seconds in a metal frame.
110V or 220V 50Hz or 60Hz• The EPTB2 can be used with a variety of voltages and voltage frequencies. Ideal for stock management when using safely on 110V or when needing to use between 110v & 220V supplies.
4m / 12' Power Cord• No need for complicated cord set changes. In addition, the kettle lead that is secured in place by screw can be change in seconds if needed to be replaced if the cable gets damaged or working on a new site where alternative plugs are more suited.
Easy Repair• Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to service the motor if needed and clean the internal parts from duct to ensure good working order.

On Four Feet - Anti scratch nylon plastic feet (rubber feet would mark some wood flooring).

The profile allows easy stacking with the EPD200 / DH35XX or the EPD300 / DH55XX dehumidifiers.

Carrying Handles• Easy to carry by one person. The handles can be removed if the product is being installed. The handles also protect the duct flanges if in transit.
Low Voltage Controller Connection• There is no integral humidistat but one can be added very simply as a controller or any alternative mode of control. A military standard connector is on the front of the unit.To add this use the remote humidistat or low voltage controls. Very safe voltage of 24V DC.
Duct Air-In & Out• The turbo blower has all ducts fitted with metal flanges to allow ducting to be added with 50mm / 2in and the same for the output. The air inlet size of duct can be changed if need for linking to other size ducts more easily.
Variable Throttle• The EPTB2 can be controlled via the analogue throttle to give full control over air flow
In-Built Heating• The 1100 Watts of power plus the compression of the air produces heat. That is between 1100W & 1800W of heat energy. This energy aids in drying exciting the water molecules in the area needing to be dried.
Auto Reset• If there is an interruption to the power supply, the EPTB2 will continue to operate as soon as the power has been returned. Perfect in locations where the there is a dirty power supply that can affect other electronically controlled products.
Hour Metre & Power Consumed Meter• Automatically logs run time in hours and and power consumed in kilo watt hours to make any restoration claim easy to calculate by the home owner claiming back the cost of electricity.

Main Switch - Power on switch and power on green light indicator.
Low Air Flow Light - Whether blowing or sucking, if there is a blockage a warning indicator will illuminate red. Should the motor overheat in this instance the motor will shut down, cool and restart when the temperature reduces adequately.
In-Built Silencer - Able to operate at 47dB, the Turbine Blower 2 is able to operate even when occupants are sleeping.
All Metal Construction - All mild steel inside and out. Designed for longevity and the restoration trade in mind.

Additional Details

Additional Details
Delivery	This item is usually stocked overseas and takes about 2-3 weeks to deliver. If stock in UK deliverable in 3-4 days. Enquire on 01729 824108
Brand	EcorPro
Warranty	1 year manufacturers warranty

Useful Articles

How to compare dehumidifiers with performance stated at different ambient conditions

Comparing different dehumidifier products when the ambient conditions for which their performance stated are different is difficult but this video explains how to compare them

Read

01/07/20
Industrial Evaporative Coolers from Master

9th April 2019 - The Master BCF range of industrial evaporative coolers bring greater versatility to the moulded plastic 'one size' evaporative coolers market.

Read

09/04/19

View all

Heat Load	Watts	BTU
Average The Room Is A Normal Residential Room, Office, Reception Area Or Similar, Where There Is Not Overly Crowded With People, Computer And Office Equipment.
Above Average There Are Factors That Contribute To Additional Heat Being Generated In The Room E.G. Strong Lighting, Overcrowding With People And Office Equipment, Conservatory Type Room, Or Flat Roofed Room.
High There Are Factors That Contribute To A High Heat Load In The Room. E.G. Commercial Cooking, Much Computer And Server Equipment, Switchgear, Temporary Building With Thin Walls And Flat Room, Plain Glass Conservatory.

Variable	Units	Notes/Guidance
System Airflow	M3/Hr	If you have it in cfm then multiply your cfm value by 1.7 to get m3/hr
Average Combined Pressure Drop Of Filters Of Higher Than F6 Efficiency	Pascals	F8 bag filters pressure drop - typical clean clean to dirty, 160 - 250 Pascals F9 compact filters pressure drop - typical clean to dirty, 160 - 350 Pascals H10 HEPA filter pressure drop - typical clean to dirty, 250 - 600 Pascals 9.8 Pascals = 1 mm wg, & 249 Pascals = 1 inch wg
Carbon Filters Pressure Drop	Pascals	For compact type carbons pressure drop between 100 - 150 Pa Bonded carbon panels typically 150 - 170 Pa Loose granular carbon panels typically 130 Pa
Annual Operational Hours	Hrs/Annum	8760 hours in a year If operating for 5 days a week, excluding public holidays, for 12 hrs/day = 3000 hrs
Cost Of Power	Pence Per Kwh	Huge variance in what different companies pay. heck your last bill to be sure, otherwise put in 10p
Fan Efficiency	(As Decimal Value, Eg 100%=1)	Would typically be around 60%, so if you don’t have specific information use 0.6
Fan Motor Efficiency	(As Decimal Value, Eg 100%=1)	Larger motors should be around 90%, so if you don’t have specific information use 0.9

The Total Average Pressure Drop Over Your Higher Efficiency Filters And/Or Carbon Filters Is;		Pascals
This Pressure Drop Is Costing In Energy Alone	£	Per year
It Is Probable That A Sanuvox In-Duct System Could Break Down The Biological, Chemical And Odourous Contaminants On This Air Flow For Between 16 And 25% Of This Running Cost	£	Lower energy cost estimate of an equivalent Sanuvox system (16%)
	£	Higher energy cost estimate of an equivalent Sanuvox system (25%)

Type Of Building	Kw Range		BTU Range
Sports Centres
Retail Premises
Office Premises
Small Industrial Unit
Medium Industrial Units
Larger Industrial Buildings
School/Community Halls
Churches