VBR 80-50-3

Pricing

Quantity:

£843.84 ( £1,012.61 incl. tax)

Buy 2 for £826.97 ( £992.36 incl. tax) each and save 2%
Buy 4 for £810.09 ( £972.11 incl. tax) each and save 4%
Buy 6 for £793.21 ( £951.85 incl. tax) each and save 6%
Buy 8 for £776.34 ( £931.61 incl. tax) each and save 8%
Buy 10 for £759.46 ( £911.35 incl. tax) each and save 10%

Overview

• 800 x 500mm face area
• 838 x 538mm connections
• 3 row heat exchanger
• Max 150°C/10bar

Product Code: 5477

Trade Enquiry

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Application: The VBR water heating battery is designed to use hot water as an energy medium and is used to heat up the ventilation air in a ventilation system with rectangular ducts.

Design: Casing made of Zinc Magnesium-coated sheet steel, ZM 200. Coil with copper pipes and pipe connections as well as aluminium fins. Duct connections are fitted with standard 20 mm flanges. VBR duct heaters meet air tightness class C as per EN 15727. The VBR duct heater is also equipped with nipples for draining and venting as well as an internally threaded connection for installation of antifreeze sensors.

Installation: Can be installed in a horizontal or a vertical duct with the air flow in any direction. It is also designed to be fixed to the rectangular duct system with screws or guide connections. If the VBR water heating battery is being used in cold conditions, then it should be fitted with a frost protection device with a sensor to reduce the risk of damage from freezing.

Operating Data: Maximum operating temperature of 150 °C and a maximum operating pressure of 1,0 MPa (10Bar). All the coils are pressurised and leak tested.

Control: Unit capacity can be controller on demand by using recommended accessories - controllers, various sensors, valves and actuators to provide regulation of the room or supply air temperature.

Maintenance: The water heating battery is fitted with a removable cover to facilitate easy cleaning and maintenance. The heat exchanger must be cleaned regularly in order to retain the best performance from the heater. Cleaning is facilitated by using a mild detergent. An effective filter is recommended in the system to reduce maintenance work.

Additional Details

Additional Details
Delivery	This item is usually stocked overseas and takes about 2-3 weeks to deliver. If stock in UK deliverable in 3-4 days. Enquire on 01729 824108
Brand	Systemair
Warranty	1 year manufacturers warranty

VBR_80-50-3_WATER_HEATING_BATT.pdf (0.3MB)

VBR_IMO_172010.pdf (0.4MB)

Useful Articles

Radiant Heating for Hot Yoga

Radiant heating for hot yoga studios is less than striaight forward. Here is how Puravent tackle these tricky applications. Control is key

Read

10/11/23
Heat from waste wood

There are plenty of blogs about biomass boilers and RHI but what if you want your heat from waste wood to be warm air rather than water. Here's how!

Read

10/11/23
Jumbo Heaters Even Better Than Before

Jumbo heaters have long been recognised as one of the best mobile diesel fired heaters in the market. We examine this revamped classic range of heaters

Read

10/11/23

View all

Heat Load	Watts	BTU
Average The Room Is A Normal Residential Room, Office, Reception Area Or Similar, Where There Is Not Overly Crowded With People, Computer And Office Equipment.
Above Average There Are Factors That Contribute To Additional Heat Being Generated In The Room E.G. Strong Lighting, Overcrowding With People And Office Equipment, Conservatory Type Room, Or Flat Roofed Room.
High There Are Factors That Contribute To A High Heat Load In The Room. E.G. Commercial Cooking, Much Computer And Server Equipment, Switchgear, Temporary Building With Thin Walls And Flat Room, Plain Glass Conservatory.

Variable	Units	Notes/Guidance
System Airflow	M3/Hr	If you have it in cfm then multiply your cfm value by 1.7 to get m3/hr
Average Combined Pressure Drop Of Filters Of Higher Than F6 Efficiency	Pascals	F8 bag filters pressure drop - typical clean clean to dirty, 160 - 250 Pascals F9 compact filters pressure drop - typical clean to dirty, 160 - 350 Pascals H10 HEPA filter pressure drop - typical clean to dirty, 250 - 600 Pascals 9.8 Pascals = 1 mm wg, & 249 Pascals = 1 inch wg
Carbon Filters Pressure Drop	Pascals	For compact type carbons pressure drop between 100 - 150 Pa Bonded carbon panels typically 150 - 170 Pa Loose granular carbon panels typically 130 Pa
Annual Operational Hours	Hrs/Annum	8760 hours in a year If operating for 5 days a week, excluding public holidays, for 12 hrs/day = 3000 hrs
Cost Of Power	Pence Per Kwh	Huge variance in what different companies pay. heck your last bill to be sure, otherwise put in 10p
Fan Efficiency	(As Decimal Value, Eg 100%=1)	Would typically be around 60%, so if you don’t have specific information use 0.6
Fan Motor Efficiency	(As Decimal Value, Eg 100%=1)	Larger motors should be around 90%, so if you don’t have specific information use 0.9

The Total Average Pressure Drop Over Your Higher Efficiency Filters And/Or Carbon Filters Is;		Pascals
This Pressure Drop Is Costing In Energy Alone	£	Per year
It Is Probable That A Sanuvox In-Duct System Could Break Down The Biological, Chemical And Odourous Contaminants On This Air Flow For Between 16 And 25% Of This Running Cost	£	Lower energy cost estimate of an equivalent Sanuvox system (16%)
	£	Higher energy cost estimate of an equivalent Sanuvox system (25%)

Type Of Building	Kw Range		BTU Range
Sports Centres
Retail Premises
Office Premises
Small Industrial Unit
Medium Industrial Units
Larger Industrial Buildings
School/Community Halls
Churches

Room/building volume	m3
Temperature differential (deltaT °C)	°C

Get in Touch

VBR 80-50-3

Give Us a Call

Our Address

Leave a Message

General Enquiries

Technical Enquiries

Postal Address

Email Us