Thermolier Unit Heater (Steam Fed) single phase. 223L-S-H-1

The distinctive Thermolier Steam-fed Unit Heaters are fan driven, hot air heating system products, which utilise heat exchange technology to transfer heat from steam to the air, keeping costs at bay. Front louvers and careful situation of the units gives exceptionally fast warm up and practical heat control in high roofed, large spaces. Requiring little or no maintenance, this system is tough and efficient.

There are 5 standard size horizontal airflow models in the range, each size available with a either single phase or 3 phase motor. The 3 phase variants have flameproof motors as standard. If you require variation from the standard i.e. vertical down-flow models stainless steel build, please contact our sales team who will be happy to help.

The rated heat outputs (kW) is based on 3 Bar of Steam pressure and entering air temperature of 20?C. For other performance points with other condition parameters the down load 'Thermolier performance table' at the foot of this page should be your guide.

Consider the standard specifications?p>

• Casing is constructed from 1mm thick zinccoated steel to BS.1449.
• The body andlouvers are stove enamel finished in postoffice red with the louvre box and fan guardblack.
• Heater battery is constructed using 15mmoutside diameter specifically made thickwalled copper tubes to BS.2870 gradeC106.
• The fins are 0.35mm thick aluminiumto B.S.1470.
• The boiler plate header channelsare 8mm thick steel to BS.1501-161-430B.
• Eyebolts are secured to lugs welded directlyto the headers.
• The battery is hydraulicallytested to 25 bar for not less than five minutes.
• Motor and fan assembly is a continuouslyrated, totally enclosed air over motor typewith IP44 protection against the penetrationof dust and moisture into the windings.
• The motor fully complies with BS.2048 pt. 1,BS 5000 pt. 2 and BS.2757.
  
  

The following variations to the standard design are offered as follows;

• 415v 3 phase ATEX rated fan motor (II 2 G Ex d lIB T6 to T3).
• Stainless Steel casing
• Stainless steel heater battery with copper fins