CAP-G-125-16-SW

Pricing

Quantity:

£97.87 ( £117.44 incl. tax)

Buy 2 for £95.91 ( £115.09 incl. tax) each and save 2%
Buy 4 for £93.96 ( £112.75 incl. tax) each and save 4%
Buy 6 for £92.00 ( £110.40 incl. tax) each and save 6%
Buy 8 for £90.04 ( £108.05 incl. tax) each and save 8%
Buy 10 for £88.08 ( £105.70 incl. tax) each and save 10%

Overview

CAP-G is a ceiling diffuser with directionally adjustable nozzles. This enables functionality in a vast range of operation modes like horizontal, vertical, diagonal, single- or multi-directional and swirl for both, cooling and heating. Typical installation sites are offices, hospitals, public and business buildings etc. The installation height is up to 4m. It is possible to remove the diffuser face to access the duct system and for easy cleaning and service. Pull the front plate one step out from the main body to create an air gap around the diffuser increasing the flow capacity. Max temperature difference for cooled air deg C. 12 K.

Product Code: 160082

Trade Enquiry

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Design

The diffuser is made of powder paint coated galvanized steel sheet. The nozzles are ABS Plastics. The diffuser plate is adjustably attached to the base with circular tight connection.

Mounting

The diffuser is specially designed for flush mounting in false ceiling. By opening a square hole in the ceiling slab the diffuser back box can be completely recessed into the opening onto the metal flange. The flange, which is part of the back box, is used to cover the edges of the opening. The diffuser is fastened to the duct or plenum box THOR from the inside of the spigot by screws or pop rivets. The front plate with the nozzles is easily detached from the back box by gently inserting a screwdriver in openings on the side after which the two parts are bent apart. In the same fashion a small extra air gap can be created around the diffuser.

Additional Details

Additional Details
Delivery	This item is usually stocked overseas and takes about 2-3 weeks to deliver. If stock in UK deliverable in 3-4 days. Enquire on 01729 824108
Brand	Systemair
Warranty	1 year manufacturers warranty

CAP-G_DATASHEET.pdf (9.9MB)

Heat Load	Watts	BTU
Average The Room Is A Normal Residential Room, Office, Reception Area Or Similar, Where There Is Not Overly Crowded With People, Computer And Office Equipment.
Above Average There Are Factors That Contribute To Additional Heat Being Generated In The Room E.G. Strong Lighting, Overcrowding With People And Office Equipment, Conservatory Type Room, Or Flat Roofed Room.
High There Are Factors That Contribute To A High Heat Load In The Room. E.G. Commercial Cooking, Much Computer And Server Equipment, Switchgear, Temporary Building With Thin Walls And Flat Room, Plain Glass Conservatory.

Variable	Units	Notes/Guidance
System Airflow	M3/Hr	If you have it in cfm then multiply your cfm value by 1.7 to get m3/hr
Average Combined Pressure Drop Of Filters Of Higher Than F6 Efficiency	Pascals	F8 bag filters pressure drop - typical clean clean to dirty, 160 - 250 Pascals F9 compact filters pressure drop - typical clean to dirty, 160 - 350 Pascals H10 HEPA filter pressure drop - typical clean to dirty, 250 - 600 Pascals 9.8 Pascals = 1 mm wg, & 249 Pascals = 1 inch wg
Carbon Filters Pressure Drop	Pascals	For compact type carbons pressure drop between 100 - 150 Pa Bonded carbon panels typically 150 - 170 Pa Loose granular carbon panels typically 130 Pa
Annual Operational Hours	Hrs/Annum	8760 hours in a year If operating for 5 days a week, excluding public holidays, for 12 hrs/day = 3000 hrs
Cost Of Power	Pence Per Kwh	Huge variance in what different companies pay. heck your last bill to be sure, otherwise put in 10p
Fan Efficiency	(As Decimal Value, Eg 100%=1)	Would typically be around 60%, so if you don’t have specific information use 0.6
Fan Motor Efficiency	(As Decimal Value, Eg 100%=1)	Larger motors should be around 90%, so if you don’t have specific information use 0.9

The Total Average Pressure Drop Over Your Higher Efficiency Filters And/Or Carbon Filters Is;		Pascals
This Pressure Drop Is Costing In Energy Alone	£	Per year
It Is Probable That A Sanuvox In-Duct System Could Break Down The Biological, Chemical And Odourous Contaminants On This Air Flow For Between 16 And 25% Of This Running Cost	£	Lower energy cost estimate of an equivalent Sanuvox system (16%)
	£	Higher energy cost estimate of an equivalent Sanuvox system (25%)

Type Of Building	Kw Range		BTU Range
Sports Centres
Retail Premises
Office Premises
Small Industrial Unit
Medium Industrial Units
Larger Industrial Buildings
School/Community Halls
Churches

Room/building volume	m3
Temperature differential (deltaT °C)	°C

Get in Touch

CAP-G-125-16-SW

Give Us a Call

Our Address

Leave a Message

General Enquiries

Technical Enquiries

Postal Address

Email Us

Get in Touch

CAP-G-125-16-SW

Useful Articles

Give Us a Call

Our Address

Leave a Message

General Enquiries

Technical Enquiries

Postal Address

Email Us