RCHS-3210
The RCHS-3210 is a 3kw fan heater for ceiling mounting. Inset white aluminium diffuser for 600mm x 600mm T bar ceiling. Mounting brackets are provided for mounting either directly to a standard 600mm x 600mm grid or by suspension rods to suitable supports. The brackets allow mounting flush with the ceiling or on top of the T bar allowing the fitting of the aluminium diffuser. The front panel can be cut down to a minimum of 600mm x 400mm for non standard tiles. Single units can be wired through a suitable thermostat mounted out of the direct influence of the heated airflow. Multiple units are best controlled in zones via thermostat and contactor. The heaters are designed for ceiling mounting. It is not advisable to position them over desks, counters or high level display racking wherever a constant flow of heated air may be uncomfortable or cause overheating.
| RCHS-3210 | |
| power (watts) | 3000 |
| voltage (v) | 230 |
| Length (mm) | 590 |
| Height (mm) | 570 |
| Depth (mm) | 210 |
| Weight (kgs) | 8 |
| Delivery | Normally 2 - 3 working days. Expect within 5 working days of order |
|---|---|
| Brand | CIH |
| Warranty | 1 year manufacturers warranty |
Useful Articles
-
Radiant heating for hot yoga studios is less than striaight forward. Here is how Puravent tackle these tricky applications. Control is key10/11/23 -
6 tips for drum heating and pre-heating other raw materials to help you get them up to a the temperature where they become useable.10/11/23 -
There are plenty of blogs about biomass boilers and RHI but what if you want your heat from waste wood to be warm air rather than water. Here's how!10/11/23
