DXRE 100-50-3-2,5 Duct cooler

The DXRE is most commonly used for central cooling and heating of the ventilation air but can also be used for individual cooling and heating of the air supplied to individual rooms. The same model can be used for both left-hand or right-hand installation. DXRE has a coil of copper tubes and hydrophilic coated aluminium fins. The removable stainless steel drip tray leans towards the drain connection. A droplet eliminator (accessory) can be fitted regardless of the direction of the airflow. The DXRE is a rectangular duct cooler that is intended for installation in a horizontal duct with the airflow in either direction. We recommend that a DE droplet eliminator (accessory) should be installed on the outlet side of the coil if the air velocity is in excess of 2.5 m/s. DXRE can be used with different split and VRF outdoor units and with various refrigenrant types and in different modes (cooling only and heat pump). Installation should be done by certified refrigerant technican. Max. operating pressure: 4.15 MPa (41.5 bar). Max. test pressure: 4.8 MPa (48 bar).