Tanner MDC range

Skip to the beginning of the images gallery

Details

The TANNER MDC is range of LPHW air heater with centrifugal fan.

Using a centrifugan fan rather than a axial fan enables more of the huge Tanner range of accessories to be utilised including mixer boxes, louvers, filter boxes etc. It means that building a LPHW air heating system that mixes fresh and recirculating air, as well as filtering it ans ducting to to different areas of the building is easy. Tanner MDC units can expel air horizontally or vertically. The unit has a powerful centrifugal fan which means it is suitable for many applications.

Remote connection for the Mark TANNER MDC is possible with the Pintherm Connect. The controller is equipped with an on/off contact and a 0-10VDC output. The settings of the thermostat can be read and/or modified with Modbus or Ethernet. This makes it possible to operate the air heater remotely. The thermostat can also be connected to the BMS (building management system).

Features:

– Manufactured with a corrosion-resistant aluzinc housing as standard
– Copper/aluminium heat exchanger
– Highly versatile due to extensive configuration options
– Available as 230V or 400V
– Remote connection possible with the PinTherm Connect!

Optional EC-motor (230V / 0-10V), advantages of which are:

– The highest efficiency in case of speed control
– Up to 50% energy saving in case of partial load
– Almost completely linearly adjustable
– Long lifetime
– Low noise level
– Integrated electronic thermal protection

The MDA casing sizes and coil size/row options are exactly the same as for the Tanner MDA range so for thermal outputs and differnt conditions please refer to the Tanner MDA brochure. If in doubt or if you need a quotatoin for a particular model of Tanner MDC, please contact us.

Additional Details

Additional Details
Delivery	This item is stocked overseas. Please contact the office for leadtime.
Brand	Mark
Warranty	1 year warrenty in compliance with ORGALIME S2000

Brochure-Tanner-MDC-water-fed-air-heater-centrifugal-fan.pdf (0.9MB)

Electrical-diagram-motor-control-Mark-Tanner-MDC-100-200-300-230V.pdf (0.2MB)

Electrical-diagram-motor-control-Mark-Tanner-MDC-400-400V.pdf (0.1MB)

Useful Articles

Radiant Heating for Hot Yoga

Radiant heating for hot yoga studios is less than striaight forward. Here is how Puravent tackle these tricky applications. Control is key

Read

10/11/23
Heat from waste wood

There are plenty of blogs about biomass boilers and RHI but what if you want your heat from waste wood to be warm air rather than water. Here's how!

Read

10/11/23
Jumbo Heaters Even Better Than Before

Jumbo heaters have long been recognised as one of the best mobile diesel fired heaters in the market. We examine this revamped classic range of heaters

Read

10/11/23

View all

Heat Load	Watts	BTU
Average The Room Is A Normal Residential Room, Office, Reception Area Or Similar, Where There Is Not Overly Crowded With People, Computer And Office Equipment.
Above Average There Are Factors That Contribute To Additional Heat Being Generated In The Room E.G. Strong Lighting, Overcrowding With People And Office Equipment, Conservatory Type Room, Or Flat Roofed Room.
High There Are Factors That Contribute To A High Heat Load In The Room. E.G. Commercial Cooking, Much Computer And Server Equipment, Switchgear, Temporary Building With Thin Walls And Flat Room, Plain Glass Conservatory.

Variable	Units	Notes/Guidance
System Airflow	M3/Hr	If you have it in cfm then multiply your cfm value by 1.7 to get m3/hr
Average Combined Pressure Drop Of Filters Of Higher Than F6 Efficiency	Pascals	F8 bag filters pressure drop - typical clean clean to dirty, 160 - 250 Pascals F9 compact filters pressure drop - typical clean to dirty, 160 - 350 Pascals H10 HEPA filter pressure drop - typical clean to dirty, 250 - 600 Pascals 9.8 Pascals = 1 mm wg, & 249 Pascals = 1 inch wg
Carbon Filters Pressure Drop	Pascals	For compact type carbons pressure drop between 100 - 150 Pa Bonded carbon panels typically 150 - 170 Pa Loose granular carbon panels typically 130 Pa
Annual Operational Hours	Hrs/Annum	8760 hours in a year If operating for 5 days a week, excluding public holidays, for 12 hrs/day = 3000 hrs
Cost Of Power	Pence Per Kwh	Huge variance in what different companies pay. heck your last bill to be sure, otherwise put in 10p
Fan Efficiency	(As Decimal Value, Eg 100%=1)	Would typically be around 60%, so if you don’t have specific information use 0.6
Fan Motor Efficiency	(As Decimal Value, Eg 100%=1)	Larger motors should be around 90%, so if you don’t have specific information use 0.9

The Total Average Pressure Drop Over Your Higher Efficiency Filters And/Or Carbon Filters Is;		Pascals
This Pressure Drop Is Costing In Energy Alone	£	Per year
It Is Probable That A Sanuvox In-Duct System Could Break Down The Biological, Chemical And Odourous Contaminants On This Air Flow For Between 16 And 25% Of This Running Cost	£	Lower energy cost estimate of an equivalent Sanuvox system (16%)
	£	Higher energy cost estimate of an equivalent Sanuvox system (25%)

Type Of Building	Kw Range		BTU Range
Sports Centres
Retail Premises
Office Premises
Small Industrial Unit
Medium Industrial Units
Larger Industrial Buildings
School/Community Halls
Churches

Room/building volume	m3
Temperature differential (deltaT °C)	°C

Get in Touch

Tanner MDC range

Give Us a Call

Our Address

Leave a Message

General Enquiries

Technical Enquiries

Postal Address

Email Us