VFLPG range electric heater battery for PG Guide
The VFLPG range of electric heater batteries have casings to enable them to be mounted into PG Guide.
to ducting with corresponding flanges.
• Output range 0.5 kW 2000 kW
• Degree of protection IP43 as standard, IP55 or IP65 upon request
• Integrated control equipment or for external feedback control
• Integrated overheating protection devices, at least on with automatic reset and one with manual reset
• Enclosed stainless tubular heating elements
• 50/60 Hz
• Can be mounted horizontally or vertically
Control
There are several options offered with these heaters batteries which enable differing methods and complexity of control;
- MTEML /-MQEML / -MTUL / -MQUL, for One or Two Sensors. Duct heaters with integrated temperature regulator, for room or duct sensors. Can also be connected to a main sensor in the
room and to a min./max. sensor in the inlet air.
- MQXL / -MTXL, for 0...10 V Control Signal Duct heaters with integrated regulator for external 0...10 V control signal.
- MQYL / -MTYL, for 2...10 V Control Signal.
- MQCL / -MTCL, for 4...20 mA Control Signal.
- M, not internal control; instead for connection to external controls and regulator.
The duct heaters may be equipped with Modbus communication.
Other
- Width 160 mm min. 3000 mm max. (open surface for air flow)
- Height 160 mm min. 3000 mm max. (open surface for air flow)
- Required capacity can be specified as well as the numnber and size of the heat stages
- There are numerous options available which are explained fully in the downloadable literature below
Full details of the range and how to create a model code are outlined in the brochure via the link below.
Delivery | Dependant on stock availability. Check with us before ordering |
---|---|
Brand | Veab |
Warranty | 1 year warrenty in compliance with ORGALIME S2000 |